SOLIDWORKS 2019: Hole Wizard - Specifying Tolerances

An enhancement to the Hole Wizard In SOLIDWORKS 2019 is the ability to specify different tolerances for each aspect of the hole wizard feature in the Hole Wizard property manager.  Previously, this had to be done manually in the drawing.

Now this can be entered into the part so that it automatically populates the hole call-out in the drawings.  To specify the tolerances in the Hole Wizard property manager, locate the Tolerance/Precision section at the bottom of the Hole Specification as shown below.

In the Tolerance/Precision section, select the drop down for the Call-out value that needs to be defined.

Then set up the Tolerance Type and corresponding values as needed.

The resulting hole call-out in the drawing will reflect the settings in the part.